Originally Posted by
idbdoug
Hello
I have the following 3 HW ESC's:: Just stock, 1S V3.1, and V3.1 stock spec.
I must being missing something on what software to use.
I have the newer Multi Function program box and i have V1.14_130508 on it. When i plug into multi function box the computer HW software shows database ver 3.3, Hardware version HW310_V2.1 and Multi function box show V1.14_130508.
I can read Juststock fine and program it, but i can't get multi function box to read or program my 1SV3.1 speedo
Thanks for any help
idbdoug
Plug the multi lcd box to the pc and upgrade the software to the new version once you open the v3.3 usb link it will give you the option on drop menu which software you can use.Also make sure you have plugged in the lcd box to the programming port also listed as external fan 3 pin on your v3.1 escs etc as the justock uses the rx port to program the v3 uses the 3 pin fan prg port to program.