Originally Posted by
bkspeedo
Has anyone come up with a method to keep the mount at least on the swaybar so you don't loose it?
I was thinking about putting a small piece of shrink wrap on the end of the bar so the mount won't be lost it will just need to be reinserted.
The only part other then spurs that I have had to replace in my A700 so far is that U mount for the sway bar. Mine came off as well with hitting a board. Simple fix is to not hit anything I know.
I do have an idea for the future, but I think it would require a little bit longer ends to the sway bars. You could then add a circle type clamp at the end. So if it does pop off the U holder will not get lost. The way it is now the clamp at the end doesn't have enough room. So another say 3-5mm on the end should give plenty of room to add one of these without interfering with the movement.
