Originally Posted by
Essnowyt
So any idea why the ball studs were changed? I recall from the T3'12 to the T4'13 the bulk heads were lowered approx 1mm. So now with these studs, that is now negated.
Snowy.
I thought they were lowered 2mm from T3 to T4.
The inner camber link balls have a bit more thread, which is welcome for running 2mm. Thread engagement was a bit sketch with a 2mm spacer on the T4'13 balls.
As for raising the height, the only thing I can think of is that maybe they wanted to get rid of bind at the more extreme angles.
-Mike