Originally Posted by
Clint161
I feel it is a Savox servo issue.
I just built my '14 and bought a Savox because I liked the one I put in my XB4.
I set my car up the same way you do getting everything centered then making the conection from the steering to the servo making everything ballanced.
I can only get about 19deg inside and 14deg out on my setup. The center post is about 3mm from the arms.
I put in my Futaba servo from my old T4 and I get can dial in full steering throw. My Savox just doesn't have nowwhere near the same degrees of travel as my Futaba
I drove out on the street once I put the Savox in. The street might be so different than the track but it actualy seemed like it turned tight enough.
Will it be ok?
I'm afraid there is only one way to find out. Just take the Futaba with you in case you need to have more throw, but with a good setup you probably won't and you know you'll be getting less scrub if you can get away with less steering.