DIRTMONKEY

Not much happening here, must be all apples with the F1.

The 200mm front is now available part numbers #411313
Front set wide F110 and spare arms #411314
Suspension arm L+R wide carbon F110, I know most if not all of the US is 180mm but I thought I'd put it out there.

So far things have been going well with the F110 each run is getting better with the car.

We've had the front bulkhead revised here in OZ. My team mate (a fitter and turner) has made it from aliuminium with great results I'll post pics tomorrow.

Other things I've done to date is 2mm spacers under the front top arm giving more roll center, caster is now also at 6 deg, and the side springs are now 6.25 AE springs. Next test is to try out all front springs. Here in OZ the tracks are slightly more rougher and the softer springs that the TAMIYA drivers are using aren't working as well for me with the F110 so I'll try going harder and see what happens.

This body is for use only for the camera when videoing races.


Until next time WILL