tc4
i just ran my tc4 for the first time yesterday and if i tapped a board it would pull the cvd out of the outdrive.i put the axle shims in front of the inside bearing so that it pushes the axle as far into the outdrive as possible.i am running on carpet with foam.has anyone had this problem , if so what can i do to fix it.
also i have to what on the car to steer entering the turn and it has an on power push.
frnt
60w/#2
white springs
arm mounts 1fr/2 -1antidive
shock t out arm out
camber link 2nd from inside one washer
steering blk ball inside
rear
60w/#2
purple springs
arm mounts 4fr/2r +2 antisquat
shock t outside arm out
camber link 2nd from inside 1 washer inside on rear hub
also i am running stock wheelbase and i have 4deg caster blks on frnt and an running -2 deg camber frnt and rear. any help would be thankfull. thanks