I ran over the weekend at NORCAR's annual Vegas Warm-up race.
A TQ and win for my XTi ride!
Here's a pic and the set up I used.
Take note, the CRC carpet was just put down on a new subfloor and the traction was very high!
Set up:
Front:
1.60" grays, 1/2 inside SXT, sidewall glued
.50mm springs (.01" gap between steering block and lower pivot ball)
10* blocks, 2 shims back
1* camber
3.5mm clearance
Rear:
stock shock oil with windtunnel blue "v-hive" spring
CRC blue side springs
15K in tubes, outside elevated
1.65" grays, 3/4 middle SXT, safety glue on seem
3.5mm clearance
1.5mm droop
Notes:
Black Art body
Power Push White Lightening battery
Team Scream motor (Trinity based Killshot)
Hobbywing 1s ESC
Attachment 1112805