What do I change first?
Need some suggestions on set up? Not sure if I'm doing this correctly. Tried to change a few things the last time I was at the track and didn't seem to make a difference. Using a softer front spring helped a little.
I need more "on power" front grip for my TA05. Car tends to push when going into corners. Any chance a spool might help?
Running USGT class on carpet with HPI "X" pattern tires.
Current set up :
Front
4° Hub
-2° Camber
3 hole piston
40wt oil
Yellow spring
Ball Diff
#3 hole on inner camber link w/1mm spacer
0mm spacer on outside camber link
2mm spacer on rocker arm
#2 push rod position on susp. arm
Rear
-1° Camber
3 hole piston
40wt oil
Blue spring
#5 hole on upper arm position w/.5mm spacer
#2 hole on outer axle w/2mm spacer on outside camber link
#3 hole on shock tower
#1 hole on arm
Any suggestions?
Thanks