Originally Posted by
hacker07
The issue may be the age of your Orion ESC. That esc may have older software which then faults to the sensorless mode. You have to hook it all up with their box and update the software on the esc to their 4 pole software. Then you should be good.
I do have the 4 pole firmware and have tried re downloading the firmware and everything. Still have the same issue. I use the smc 5600 70c packs and I know a bunch of other people that use the same packs without issues but they use the rx8. But I will try to see what I can do.. Anymore suggestions? Also It ran fine with a scx4 5.5t motor I used to have. I didnt have the one second loss of acceleration issue that im having now..