R/C Tech Forums - View Single Post - Lab C-02
Thread: Lab C-02
View Single Post
Old 08-12-2013, 10:04 AM
  #304  
dj apolaro
Tech Elite
 
Join Date: May 2005
Location: Miami, Fl.
Posts: 2,433
Default

Originally Posted by monaro
Hi guys
Has any one got a good set up using the big bore shocks they could share
I tried them for first time on the weekend an the car was a handful to drive
I'm using stock springs with 1500 Xceed oil 6 hole piston had a lot if steering
Should I go heavier oil or springs thanks

I can tell you that for me the stock way they come is too soft. I used 1 hole front and 2 hole rear with 50wt and it is much better. Also try to start with the 4.6kg springs in the front and 3.8kg in the rear.

I think this will be better. You may want to lower the front upper pins 1 spot also.

Let me know if you try this and it helps.

DJ Apolaro
dj apolaro is offline