Just a heads up and maybe it has been said in the past. I ordered some 3-racing shock towers for the 416 because it would give me more shock position holes. The mounting holes are the same for both cars. However it does come with a trade off. The holes are about 3-4mm lower then the evo towers. So if you want to run them you will need shorty springs otherwise you will be 4x4'en.
First picture shows 3 racing on the bottom. The front shock tower has 7 holes vs 5 where the back ones both have 6 but holes are closer together. The 2nd pic is showing the difference of height for the holes. (Not a great picture but you should be able to see the height difference.)