http://www.hobbyking.com/hobbyking/s...dProduct=42712
above is what i orginally put in the car. the programming card did not work with the esc and no instructions with esc so i couldnt set it up.
then i put in the following esc with the above motor. that didnt work well so i went down 2 on the pinion but it still would freeze up.
http://www.raidentech.com/upcokitezses.html
above is what i have in the car now. this motor is way too much for me. i am running in the novice class as i have never raced before. I wanted to start out with 21.5 turn motor and learn how to run the track before i got a more powerful motor. well now the motor is like a 8 or 9 turn and way to powerful for me. at least the car is running. did a five minute run last night and motor temp stayed right at 140. my fdr isnt exactly what i would like but i think ill leave it until i race again on friday. i have a 2.o IR running a 72/33 for a 4.364. if i change to bigger pinion to lower fdr, wont i make the motor run hotter? i'll just see how it performs friday.
how do i know if i am having too uch wheel spin and how would i fix that?
TTS
TTS