Originally Posted by
shawnh
Sorry and call me thick (
) but I don't quite understand what you mean by compressing the wishbones. Are you saying your car has excessive ride height ?
If so you could fit an o'ring under the piston inside the shock body to limit it's travel but to be honest it's not something I've ever had a problem with; unless of course you are using Touring Car TRF shocks with are longer than the M-Chassis version?
Still not too much of a issue though; you will just need a few more o'ring's in there to bring the overall length of the shock down to 56mm for the front and somewhere in the region of 56.5 to 57mm for the rear.
Thank you
Mine's got the M Chassis types. I'll get a vernier and measure the shock lengths.
Forgive my terminology, I meant that if I have 5mm of clearance the chassis side of the wishbones are lower than the wheel side due to running 60D tyres.
Cheers
Ryan