Originally Posted by
savagesam
Well after my first couple of packs through the buggy, really enjoy driving it hard, have a small concern running 6.5t and 5600 55/110 batteries with no boost or timing changes on the nosram gear and that is the motor seems to be getting hot after about 7 minutes hard running.
Im running the stock spur with a 19 pinion pretty much on tracks like the video on the last page, diffs are 7k front and 5k rear, should I be going up or down a tooth in the pinion to perhaps reduce the motor heating up ???
We've been running 20 and 21 pinions on tracks of similar size with a 6.5T Tekin Redline Gen2 and RS Pro.
19 was the first we tried 6 months ago but was way under geared and ran warm with our setup.
So I would definitely go up at least 1 tooth for outdoors
Bent