Originally Posted by
tbo713
Does anyone know of a good setup for the long chasis And what should the droop be at
FRONT: Serpent yellow or white front springs
-3* camber
2* toe out
8.5mm ride height
50k dif fluid
2 stage pistons with 1k fluid
arm braces
10* C holders (Caster)
11mm droop (from bottom of chassis to bottom of outside hinge pin)
shocks all the way out on arms and all the way in on tower
Roll center in middle
REAR:
-2* camber
3 toe in
9.5mm ride height
10k dif fluid
2stage pistons with 900 fluid
arm braces
12mm droop
Shocks inside on arm outside on tower
camber link inside on hub, inside upper on rear