I use the following on asphalt , which is what I used at TITC in feb this year, except rear toe. Shocks yokomo blue front and rear 350 wt oil, three hole piston. 3.5 toe blocks front front and front rear. On the rear I am using the kit toe blocks. ( For TITC I used the 4.2 block on the rear front and 5.7 rear rear, gives 1 degree of rear toe). This was running 13.5 blinky using the fixed HW BL motor and Justock ESC.
The rest of my setup was the same as meens TITC setup. Since returning home I have only changed the rear toe blocks to those listed above , occassionally changing the rear rear back to 5.7 from the 6.4 block.
I also changed the motor to a D3.5 Trinity 13.5 and am now still experimenting with gearing for our tracks.
Later,
Calvin
Last edited by caltek1; 04-23-2013 at 11:55 PM.