Originally Posted by
coltsfan
Has anyone been putting the ESC in the back of the battery tray with the battery a little forward? I was going to try this with a shorty pack. Just looking for any feedback. Electronics are ordered and I was trying to figure out which way for my initial set up.
http://m1278.photobucket.com/albumvi...l?o=1&newest=1
not sure if the link will work ,, battery stop is 20mm more forward using center hole on screws from stock rear battery stop as reference,, the esc was as far back as it would go but i moved it forward about 7mm so i could and take a 10g weight off the front to lighten up now i only have the 4g heavier cf front tower and the 21g front suspension block and the battery was 12mm from the rear block on high bite clay and i had plenty of steering on and off power ,, my front camber gain is 4 degrees for better tire traction when the body rolls ride height my camber is at .5 degrees and it stays their when the front lifts on power