Originally Posted by
microracer25
Hi guys, newbie here. I did not look through all the threads, but can someone help me with some pointers on setting ride height, shock lengths, and droop screws. It seems my ride height is too high. Where do most people measure ride height? I assume shock length will affect ride height. Droop screws, are they necessary, or how do I set my suspension with them? It seems with my current rear droop, the cvd's are at the very edge of the diff outdrives, which makes me a little nervous. Oh, running a med/high bite, smooth track.
I run 21-23 ride height. For measuring: Front, just before the kickup(bend) on chassis, rear usually somewhere around the rear swing arms, usually below the hinge pin holder on the rear.
I run max droop. (I cut a little bit of the chassis off on the rear to gain more droop there. On the front I believe I have 2mm of limiters inside the shock, you put these under the piston