Originally Posted by
scytherat
How are you finding the serpent ed?
On my 417 i keep suffering from lift off over steer, current setup is 120wt diff oil ( just under 1500cst) 2deg rear camber 1deg front camber, 3 deg rear toe, 0 front toe, 6 frt 5 rear droop, 40wt shock oil, tamiya blue white springs hardest of the 2 on front, 1c fr Fr split 1c fr rr, 1xa split rr fr 1e rr rr. Rear camber links 3 under inside and outside, front camber links 4 inside 0 outside, front shock fully upright rears half way.
Any ideas. Thanks
Good, although I've only had the opportunity to get the Eryx on the track once so far... although my TE is also going well too.