Originally Posted by
agarabaghi
dang, this is gonna be a hard sell...
I love my jammin, but im starting to get to the point where I don't think ill get it dialed in to not break each time i go to the track =( ...
Will my electronics be ok for the scte 2.0?
MMP w/ 4pole 3800kv
HiTech 7945
Dx2s w/ sr3300t
Those electronics should work perfectly in the scte 2.0 truck. Just gear for the best temps along with having enough speed to clear all the jumps on your track. The Castle 4 pole 3800kv is a strong little motor but there are better choices out now and you wouldn't have any issue with selling the Castle since it's highly favored by tons of people for all types of vehicles from bashing to racing.etc..
A couple of the most popular motors are the Tekin Pro-4 4600kv and the Hobbywing 4700kv. They both make massive power for such a small motor and when geared correctly you would have zero issues keeping up with any other sct motor out there basically. I recently picked up a Viper Copperhead system that comes with a 4 pole 4500kv motor and that is also a beast of a motor. It runs at a good temp, makes great power and is a smooth setup to be unsensored.