R/C Tech Forums - View Single Post - Durango DEX210 Thread
View Single Post
Old 02-04-2013, 09:14 AM
  #10070  
P6
Tech Addict
iTrader: (5)
 
Join Date: May 2012
Location: il
Posts: 685
Trader Rating: 5 (100%+)
Default

Originally Posted by FL_SilverEvo8
I just got a DEX210 and was wondering what are good must haves for this buggy(hop ups)? I will be running 17.5(Tekin Gen2) blinky(Novak Club) class. Any good set ups for a blinky class? Only set up I see are for MOD class.

( ) - is what I have in the car.
cf never hurts and titanium buckles studs and hinge pins to drop some weight plastic its already lighter than the kit but those parts are the only other way to get lighter ,, i just broke the transmission case the ball stud pulled out so the cf rear camber link is pretty needed i only have the rear cf tower but diggy desighns makes a nice all cf front tower so theirs no aluminum metal types as the inner camber links ,,, has anyone weighed a rtr without electronics vs kit no electronics vs custom with cf/titanium ,setup i wouldnt change mine if i threw in a 17.5t in maybe lower oils just to handle the straights and bumps better but blinky you wanna downside so you dont need tons of pack and if your running light then maybe lighter on the springs to
P6 is offline