R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 01-24-2013, 03:48 PM
  #11055  
shamar
Tech Initiate
 
shamar's Avatar
 
Join Date: May 2011
Location: barbados
Posts: 37
Default

Originally Posted by 314ck5h33p
This weekend was the first tests with the engine ReventonR 10.5, boosted.
Last year I used the Xtreme Xerum and Reventon is news to me.

Lucky for me I still have 2 chassis and I can compare with my old performance.
Using the setup box for 10.5, was a little slow on low speed, but it looks good high speed.
I changed some sets:
Increasing the DRRS from 7 to 8
Decreasing the Boost Start from 7000 to 5000
It seemed better, Some suggestion?
The Manteu temperature between 70 and 80 ° C (no Fan, yes sink) motor Novak Balistik 10.5
Complete Set:
FDR: 6,65
DRRS 8
Hybrid Boost Active: 70%
Hybrid Boost Maximum: 140k
Hybrid Boost Start RPM: 5000
Hybrid Delay: 0,2s

by tests and temperature, I believe that can improve, suggestions are welcome.

Tks.

hi you can try

FDR: 6,00
DRRS 8
Hybrid Boost Active: 80%
Hybrid Boost Maximum: 150k
Hybrid Boost Start RPM: 4000
Hybrid Delay: 0,2s

that should help cheers
shamar is offline