Originally Posted by
nolo148
Im running the stock gear diff stuffed with putty.
However, my car seems to have a problem after turning left or right. For example, I've noticed when I turn left and then let go of the steering wheel, the left wheel has like 3 or 4 degrees of toe out. Same with the right wheel. Im using a sanwa digital servo so I dont understand why its happening.
Also how are you guys measuring toe out/in?
Thanks
I've noticed on the M05 that the steering is sloppy enough that it doesn't fully recenter after turning in either direction. Tis is a bit annoying when you are trying to center the servo, but doesn't seem to be a problem when driving. Just don't let go of the wheel and expect it to drive straight: steer it there, instead.
I did also have a problem with one of the bell cranks bending and causing the steering to bind. In my case, it prevented full steering travel, and caused the steering to fail to recenter when it was far off center.
Alan