Originally Posted by
jimmyzrx
eunique,pickled
Thank you both for the help you have given me on my parts selection.
I am ready to get motor esc batteries and transmitter receiver
any advice?
i installed a castle 5700kv system in my tl-01 thinking more power is what i needed lol, all it is now is crazy fast.
Jimmy
Like eunique has stated 8.5T - 13.5T I'm thinking of getting the
speed passion Yeah racing combo that rcMart has if they still have it when I can afford it! Batteries look for a big battery like a 5000Mah with a C rating over 30 I'm interested in these
6000Mah 80C intellect lipo's
I'd get the GT3C it has the bearing, lipo and VR already done from factory and it's not as badly soldered as the B, I have 2 B's and both never had the flux washed off the boards so they are covered in a white corrosive film where as the C is much better other than a bad power button design that means you need to relocate it so it will continue to turn on lol we are having this same discussion over on the DM forum
Originally Posted by
eunique
glad they all liked it...it is a very nice VIP kit! Specially with your mods.
I wonder how big of a difference that track is compared to carpet?
Thanks for the tip on the KPI, I wasn't sure.
So, just the button head 15mm screw..No nut on the other end?
It just bites into the internal thread of the yokomo arms?
My 14mm just bites into the thread right now, but doesn't go all the way. I'll have to grind some more and use shim spacers like you said.
Yeah they are looking forward to see it running next week as I had servo issues with it. I wish they had a carpet track I've only run mine on a rug and loved how it got grip at the front on the tyre side walls. but that bitumen track is slipperier than anything I've ever ran it on even than an oily carpark. The screw I used just bites into the thread no nut