R/C Tech Forums - View Single Post - U.S. Vintage Trans-Am Racing Part 2
View Single Post
Old 12-16-2012, 10:06 AM
  #3281  
BigBrute_347
Tech Adept
 
BigBrute_347's Avatar
 
Join Date: Jul 2009
Location: WI
Posts: 146
Default

Originally Posted by miket3
sorry about that guys.

here's what we have right now.

Older tires ( fronts maybe 3 more race days left at best)
rear tires good tread.

blue springs all around, 35 wt oil front, 30 rear. 5.5 mm ride heigth, 3mm OVR droop front and rear. front shocks all the way in on top, outer on bottom. Rear shocks 2 from inside on top, outside on bottom. front camber link stock position inside(.030 spacer inside). no spacers outside. rear camber link all the way inside .050 spacer inside, inner hole rear hub.
front camber 0
rear camber -1
no sway bars right now.

any suggestions is appreciated.
Mike

the car is rolling middle corner, high grip track.
I've only been through a few sets of tires but it seems once u start to traction roll u may as well get the new tires ready to go. This might let u keep your current setup in tact.
BigBrute_347 is offline