Originally Posted by 3D-Seth

Its been all over the board trying to get this issue fixed.

Generally speaking this is where I left off today:

Sweep Blues
Ride height - 5mm f/r

Front
0.5º toe out
1.5º camber

Arms in middle

Red Springs
Top, 2nd hole out
Bottom, outermost hole

Camber link
3rd hole out on camber block, 2mm spacer

Steering links - rear most hole

Droop is 3 on Dynamite droop gauge

Red swaybar

Belt, medium

Rear
Toe, stock, 3 deg I think?
1.5º camber

Arms forward (1 1mm spacer forward)

Orange rear springs
Top, 3rd hole out
Bottom, outermost hole

Camber link
3rd hole out on camber block, 3mm spacer
outermost hole on hub

Droop is 3 on dynamite gauge

Red swaybar

Belt, loose


Orion 17.5
Tekin RS
JRS9100Z servo
49T pinion
96T Spur
1000wt diff oil
Protoform LTCR

At first I thought, maybe I've made the rear too soft and the rear of the chassis is hitting the ground as it rolls in the corners more causing it to lose a little rear grip, but I stiffened the rear quite a bit and didn't notice much difference (other than the rear getting really loose obviously)

Am I missing anything?