Originally Posted by
Vasco C
How-to on the steering rack:
Take the small red posts the rack is mounted on and apply a thin layer of glue (just a single strip) and let it dry. Glue the bearings inside of the sway arms and let this dry too.. Then press the sway arms with glued bearings onto the red posts using a little force, this will eliminate play instantly!
Then replace the 0.2mm shimms with 0.2's and glue the bearings (or bushings) into the steering rack too.. bolt it all together and your steering should be free of play
Hope this helps you out!
Ok I'm gonna try this just not clear on the shims ...replace ..0.2mm with 0.2?...is that not the exact same shim?