Originally Posted by
CTEKTOOL
I have a 120 amp v2.1 speedo. I tried downloading the v3 software and cant get it to work. Evidenty its not compatiable with my speedo? Where can i get software that will give me timing, boost, start rpm end rpm , etc for the 2.1?
You cannot get these features on any software for a V2.1 speedo.
They are only available on the V3 esc's.
Any of the v2.1 programmes will give you timing, boost, boost start rpm, the boost end rpm on the V2.1's is set by the acc value.
If you use a start boost of 1000 rpm, an acc of 250 and boost timing of 10, your end rpm is 10 x 250 = 2,500 + 1000 = 3,500 end rpm, if the boost timing was 50, then the end rpm would be 50 x 250 = 12,500 + 1,000 end rpm would then be 13,500 rpm. This is the end rpm of the boost being added, turbo timing would then add more rpm.