Originally Posted by
Resqnu
Thank for everyones help....I ordered the TC6.1ft. I will be messing around in parking lots and trying racing on a concrete track.
What are the minimum set up tools needed for a tc? Not looking to spend to much as this is my first try at touring and want to make sure I like. But I also want to be able to set my car up as needed to enjoy the car and bring it up to racing standards. I've been racing sct 2 &4wd for years and spare no expense on them. I hope I will enjoy racing tc just as well and if so with buy the best set up tools.
Many thanks for everyones help.
In my opinion you need the following:
1. Flat setup board (3 racing makes a nice carbon fiber one)
2. Ride height gauge that reads in .2mm increments (Hudy)
3. 10mm setup blocks (any brand)
4. Digital calipers
5. Camber gauge/block that reads in .5 deg increments
The droop gauge that comes in the kit is OK although I use digital calipers/setup blocks to measure if even from side to side.