Originally Posted by
8ight-e
Anyone have a nice indoor clay setup? Thx..
Any reason to get the RTR over the kit?
Front:
24mm ride height, -1 deg camber, 30 deg castor, 3mm trailing, 5mm bump steer, 1mm between castor block(top & bottom), shock -mid on tower/outside arm, camber link- inside tower w/2mm spacer/outside hub, 1.3x4 pistons, Losi 27.5 oil, black spring. 2mm internal limiters nub cut off on bulkhead
Rear: RM
24mm ride height, -1 deg camber, 3 deg anti-squat, 3 deg toe in, camber link #3 on hub w/2mm spacer on inside, hubs middle, shock- mid on tower/arm, 1.3x4 piston, Losi 25 wt, drk green spring
shorty pack in middle, Exotek brass weight under servo, TD alum rear hubs/2.5mm spacer, JC wing w1.2in cut off, JC Finnisher, SP 8.5V3 geared 81/24, mid hole on Exotek steering rack.
JConcepts Barcodes -gold w/your fav inserts. Tires will be the biggest factor so run what the fast guys are running.
Was real good at CRCRC indoor med/high bite. Gonna try +8 molded DIMEC20 chassis and body next time out.
RTR does have +8mm chassis, but gear diff and only option for RM. I would go reg kit.