this is my 1st TC4...I love my 3 and was looking to see what a baseline(boxstock) TC4 Club Racer could do...
I added the fan duct system, which works great
http://www.teamassociated.com/parts/details/31037/
and the thumb screws and brace
http://www.teamassociated.com/parts/details/31039/
In the manual, its shows about the web fix and I switched to 64p...in a 78 spur and 54 pinion, FDR 3.61 w/ reman Novak SS
Im also using the XP 1313 servo, and HW Juststock esc...with Reedy Wolfpack5000 25c lipo w/ bullet connectors
Now for setup...nothing...I put the stuff in the car and it was great...set TQ and won the main on an inverted start...
Changes I plan on making
5 mm ride height f/r
35 wt f
30 wt r
VCS3 Shock Kit w/ RSD bladders
RSD springs yellow f, teal r
FT screw kit
Bearing cleaning
The good thing is setup for VTA, the car was great out of the box...it didnt push or washout in the sweeper...with some ride height and camber adjustments, the car is a winner...I think I got into the high 12's with it...and on my TC6, Im running mid 12's, on similar track conditions
I would make minor changes 1st...starting with 64p gears...its alot easier to get a better FDR...then goto oil and springs