CoreyW.

Here is Andrews setup from the IIC..

Body: PF Mazdaspeed 6
Tires: Jaco blue's
Compound: Jack 2
Weight: 1397g

Front:

2nd hole from top on shock tower
2.7 Xray spring
300cst oil
4X1.1mm pistons
1.4 Xray bar(short endlinks)
2.25 degrees camber L/R
6 degree caster blocks
1 degree toe-out
1mm spacer in front/rear of arm
Upper links middle hole on bulkhead
2mm under outer link
2mm under inner link
middle roll center blocks
2mm droop(measuring above ride height)
1.5mm Akerman
1mm bumpsteer
stock servo tie-rod position(upper position on servo saver)
Stock track width(1.5mm spacers)
Stock wheel hex with .5mm shim on each side
Xray diff using Plato as filler
52mm ECS shafts

Rear:

2nd hole from top on shock tower
2.4/2.6 Xray progressive spring
300cst oil
4X1.1mm pistons
1.2 Xray bar(short endlinks and middle position on arm)
2.75 degrees camber L/R
2.75est degrees toe-in(using .5mm shim at the rear instead of stock .7mm)
1mm spacer in front of the rear arm(2mm behind)
Upper links middle hole on bulkhead
4.5mm under outer link
2mm under inner link
high roll center blocks(+.75)
2.5mm droop(measuring above ride height)
Stock track width
Stock wheel hex
Xray diff w/2000cst
50mm stock shafts

Notes:

All screws in upper deck
15 grams of weight under steering rack