Hey guys,
I have a hobbywing Justock I picked up to replace a Tekin I had go out for my 17.5 blinky 1/12th I am running at IIC. I figured the Justock was small and light and since I am running Blinky why not.
I am potentially having some issues with the ESC in the car though. As in its way off pace. I also noticed that the booster gets quite hot in the car with the Justock. What is the proper way to setup the ESC/Booster in the car for 1S running?
The booster is essentially a TQ booster, using the one wire connection to the Pos terminal on the ESC with a switch to turn the booster on and off. I have been running with the ESC powered on and the booster powered on. No LiPo cutoff set on the ESC.
Do I need to pull the red wire from the ESC to the RX like some require?
Any help here would be great.