Originally Posted by
PutAwayWet
So, I have my new HW Xerun 120A 1s installed in my 1/12th. I've got 508 non-timing software onboard, and everything seems to work just fine. But, the "blinky" LED seems to be on the bottom of the ESC and is all but impossible to see. I took it into a dark closet to see if it was actually there. It is, but there's no way to see it in normal light, it's that faint.
Has anyone had trouble teching the Hobbywing in where a visual confirmation of the blinking light is required? Is this the normal thing?
Hey Todd!
Mine is miss kinda hard to see too. With my layout the blinky light faces the battery and is in a tight spot to see....especially with the body on. If anyone gives you trouble with tech you can always plug in the programmer and show them the software level.
I've also noticed with the Hw stuff that if the radio neutral point isn't exactly at neutral it won't blink. I've had to set the throttle trim so that its exactly at neutral....or reset the esc end points.