Originally Posted by
TryHard
The latest USB software can be downloaded from this link;
http://www.hobbywing.com/upload/soft...tup_120808.rar
You'll also need a rar unpacker to load it, I recommend 7zip (
http://www.7zip.com/) which is a really good and easy to use unpacker.
Once you've unpacked it, just run the installer, and all the software options for both the ESC and program box will be in the software.
Upgrade the esc box first by selecting it under the 'Device' menu, and upgrading the firmware. Then switch back to the ESC and do the same thing
The file at the link above has two versions of software, 504 and 511, if you don't like 511 (the latest) you can convert back to 504 very simply and easily.
HiH
Ed
Not to cross what Ed has said as he is a legend, but that's as long as it is a V3 Hobbywing ESC, if it is an earlier version then don't try to use the V3 software
Last edited by Barry_Hughes; 08-22-2012 at 11:17 AM.
Reason: missed word