Originally Posted by
Cspurlock
I wanted to ask anyone here that has tried the sc10 gear diff in the car for some help. I would be interested to know if you did anything other than just shim it(which is all that I have read)? I am trying to fit a B4.1 diff in my buggy and it seems that the gear is a little smaller in diameter, so assuming the sc10 diff was the same size I was wondering how you dealt with that?
And to answer the question that I know is coming, I am doing it because the outdrives on this car suck!
I know some of you don't have problems, but I also know a lot of people that do, and I unfortunately fall into the latter, so I want a solution.
Thanks in advance!
I have a B4/SC10 BALL diff in mine, it requires 2 bearings on each side and shrink wrap on the outdrives to take up the slop. I just had it apart changing it from RM4 to RM3 and should have taken pics.
Hope this helps.
Last edited by EvanAZ; 08-17-2012 at 03:08 PM.
Reason: ball diff not gear