Hey guys,
Finishing up the build and need a good starting point for the shocks. I've looked at numerous set up sheets and it seems to be all over the place.
Plan on starting out with the stock (kit) springs (unless you advise differently).
Seems most are using 4 hole pistons; should I drill out the included blanks?
Which diameter holes to start with?
What weight oil for front / rear?
Just looking for a good starting point to get me going. Also, starting w/ 30* caster, 1mm trailing, 3* rear toe, 3* antisquat. Small clay track; pretty slow and technical.
Thanks again guys!
SoCal