R/C Tech Forums - View Single Post - U.S. Vintage Trans-Am Racing Part 2
View Single Post
Old 08-10-2012, 05:03 PM
  #1529  
Jerz616
Tech Master
iTrader: (49)
 
Jerz616's Avatar
 
Join Date: Oct 2011
Location: Dallas,TX
Posts: 1,045
Trader Rating: 49 (100%+)
Default

Originally Posted by team mopar
Ordered a spare 25.5 today from Novak. After talking to a tech guy he informed me how to get the best lap times on my vta car. First dial the timing to 45° + one notch so 50°! Next assuming i have a good set up under the car pick a final drive that you can almost hold the car wide open threw the corners. Run the car for 2 min and check temp. Should be 90 to 120°adjust fdr if to hot. From there dial back timing to increase torque for corner speed resulting in the best lap times at a safe temps...That's Novak's suggestion what's yours? Thanks fellow VTA racers!
Just make sure you don't keep the motor above the 45*notch. USVTA rules state not being allowed to go past the line.
Jerz616 is offline