Originally Posted by
M.Abramowicz
Hi Kev!
Who made this conversion:
?
Originally Posted by
Rocky8333
Most likely an AE prototype. I believe all the factory AE pilots were running this car at the Worlds, and expect that it is at least an iteration of what the next 12th from AE will look like.
Keven's car is the prototype AE 12R5.2. Volker and I ran production versions which differ slightly in that the aluminum is anodized blue, we use the AE center shock, and the front suspension mounts from the outside of the bulkhead with a single screw (no inserts)
Originally Posted by
M.Abramowicz
But there at front end still bad design for me
Bottom screw can touch screw from a-arm ...
It is only a problem if you use the wrong screw length
Originally Posted by
M.Abramowicz
Interesting cut offs from chassis:
Originally Posted by
JustWill75
I think Mike Haynes came up with this earlier this year for running on asphalt.
The chassis is narrowed all around, not just the sides Not sure if this will be a production item or not.