Originally Posted by
Fred Hubbard
It's really too big, the teeth will protrude below the chassis, you could get away with running it on carpet but you will have to drive super smooth and not got over any dots or barriesr and run your ride height around 5.4R and 5.2F so that you don't risk the chance of cutting the rug. As for running it on asphalt, forget about it! If you want to run a big gear a 116 will suffice.
I've been running a 118t spur in a T3 with the standard lower deck with no problems, the teeth come almost flush with the chassis, they did not protrude on my car.
roger999 I suggest that as you allready have the spur gear, at your next rebuild do a test fit and see.