I just picked up a TC6. The guy I bought it from had it mostly built. I am going through setting it up now. The problem I am running into is that I cant get the turnbuckles short enough on the rear. This is my first Associated ever, and it has been 10 years since I messed with a touring car for that matter.
Anyways, I took of the turnbuckle to see if the wrong ones were put on the back but comparing them to the other ones on the car. After I adjusted them as far in as I could, they are definately shorter than the other ones on the car. I am guessing that the way the sit, they are at about 3-5 degrees of Positive Camber. Turnbuckle is mounted in hole #1, so I dont have that adjustment to play with. Any suggestions? Thanks in advance.