Originally Posted by
kwkride
Medium/high grip carpet
upright front shocks
yellow springs front and rear
40wt shock oil front and rear
5mm ride height
86t spur
46t pinion
2 degrees toe out
3 degrees neg camber front and rear
100,000 diff oil front
"kit" diff oil rear
Carpet set ups for Tamiya are usually like this:
Tamiya whites up front and blues in the rear. Usually 60w up front and 40w rear. You may want 50w in the rear. Long camber links. No toe out in the front and 2 to 3 degrees in the rear. Run CC blocks up front and xa in the rear and go from there. Heavy sway bar up front and light sway bar in rear. Start the shocks in the middle hole and experiment moving them up and down. Ride height is set to 5mm. And droop 6 and 5. Try this and see how it works. Tire prep is very important on carpet. I like spools up front over a different.oneways are fast on carpet also. Hope this gets you in the right direction