Originally Posted by beaim

i have s411te bind issue at rear diif and uj. this is serpent reply.


Gear-differential v2
The new differential as we supply in the 411-TE unfortunately has some manufacturing issues.
The differential, due to changes as made, is 1mm wider then it should be.
When you use more toe-in and/or camber the suspension will lock up, because the blades bottom out on the inside of the diff adapters.

We will make new gear-diff adaptors, and / or mo

solution....from serpent.

Quick fix for drivers is to take approx 0.1mm (more as needed) from the top of the blades, so they can go in deeper.
Other way, which requires right tooling, is to grind the diff-adaptors deeper, with a super-hard-dril

my solution.. swap the rear dogbone with tamiya 44mm or yokomo 44.5mm will do.

i wish serpent to replace the new parts.