Originally Posted by
erchn
Yea, I am running stock servo saver. Thanks for the tip, I'll try that out.
You could also just pull apart the tamiya saver and grease the rings ( springs ). That may solve the issue.
If you end up trying the X-ray servo saver you have to shave off 1-2 mm off of one of the screws that holds the servo bracket because it will rub the large diameter of the X-ray saver. Also, you need to recess the ball stud into the saver or the angle of the rod between the steering rack and the saver will be too severe and cause a collision with other suspension parts.