R/C Tech Forums - View Single Post - Xray XB9
Thread: Xray XB9
View Single Post
Old 03-28-2012, 01:38 AM
  #1160  
HH
Tech Fanatic
iTrader: (3)
 
HH's Avatar
 
Join Date: May 2009
Location: So Cal
Posts: 750
Trader Rating: 3 (100%+)
Default

Originally Posted by mcion
Unless you know magic that setup especially with the super soft springs will bottom out or chassis slap. I personally could never get away with running that low oil weight with those pistons and springs on the tracks I run at.
Hmm.. Hasn't been a problem so far.

I was given my current setup by Travis Amezcua with the only change being that I went with 27.5wt in the rear rather than the recommended 25wt.

Most of the XB9 setup sheets that I've looked at called for either the same size pistons or larger holes in the rear. So its possible the reason that it works is due to the fact I'm running the 1.2 pistons in the rear which create more pack when landing jumps or hitting the washboards at speed etc.

Here is a link to a short video of JQ on Thunder Alley Raceways current layout.
HH is offline