R/C Tech Forums - View Single Post - The Speed Passion Thread
View Single Post
Old 03-12-2012, 06:27 AM
  #9066  
Pattojnr
Tech Elite
iTrader: (19)
 
Pattojnr's Avatar
 
Join Date: Apr 2006
Location: Perth Australia
Posts: 4,594
Trader Rating: 19 (100%+)
Default

Originally Posted by Taman
It's the GT2.1EX version. I cant get it to run the motor unless I turn the low voltage protection completly off (I'm using a thunderpower 5000 Lipo). I'm wondering if it's the battery, if the only thing you need to do is set the low voltage cut off to 3.2V for it to work.
it was over a year ago i set mine up, and i dont have it anymore. 12th scale died out here . but i am sure the only issue i had was actually getting the program box to work, to do this i had to use a 2 cell pack, or a reciever pack on the program box. im am very sorry, but i dont know if i turned the lipo cut off to off, or set it a a lower voltage. the calibration worked fine for the radio ? be also sure that throttle is correct signal, if the calibration doesnt work properly then try set the throttle to reverse on your radio. Thanks.

Scrap the calibration, i overlooked your post. Sorry.
Pattojnr is offline