Originally Posted by
Bubonic-X
I'm not getting any response from the 12r5 thread so my question is when you look at the setup sheets on the associated site nobody marks what caster they are using with the 3 choices, so does that mean everybody just uses the standard 10° no matter what?
Also the setup sheets refer to a t plate used, looking at the manual there is no reference to a t plate.
Hi, sometimes questions get lost in the pages
There are two factors in the ft end castor
1. The
reactive castor or
upper arm mount setting like 0, 5 and 10 degrees
2. The
two spacers that actually adjust the castor. One is thin, one is thick
Here is an updated setup sheet with no t-bar
RC125.2