My plans include purchase of some spares such as:
- C-hub carriers,
- steering uprights,
- suspension arms.
Are there any spares that are likely to break on hard hits that I have missed?.[/QUOTE]
Add rear hubs too, and some bearings.
TIP: The front lower knuckle screws....pull out easily or break out the steering upright mounting hole, because they are 1.5 mm too short. Change these out to slightly longer ones, so the threads just go flush on the inside. Be careful... too long, and they will interfere with the cvd and pop off the retaining clip. The kit supplies with flat head screw. I just changed out to longer cap head, and added a washer (for clearance) and have not had that issue since.