R/C Tech Forums - View Single Post - Team Associated TC6 Thread
Thread: Team Associated TC6 Thread
View Single Post
Old 03-03-2012, 01:46 PM
  #6025  
grippgoat
Tech Elite
iTrader: (8)
 
Join Date: Nov 2009
Location: Woodinville, WA
Posts: 2,567
Trader Rating: 8 (100%+)
Default
Originally Posted by or8ital
I went to setup my 6.1 today for the first time and I am having trouble getting 5mm ride height in the front. With the reflex racing springs I can only get 5.8mm. I switched back to the ASC springs and can get 4.7 (which gives me very little room for adjusting for tweak). Is this normal?

Things I have checked so far:
- Backed the droop screws all the way out
- Shock upper collar all the way up
- Length of the shock is as short as I can make it
- Spring collar all the way down

Running the stock kit settings.
What tires? The shocks are long for sure, but even with Tamiya shocks which are 1-2mm longer in the cap, I can still get down to 5mm on kit springs with Sweep qts32. With VTA tires I could see an issue. I haven't mounted the RSD springs yet.

-Mike
grippgoat is offline  
Reply