Originally Posted by sizheng

I'd like to show all hobbywing fans a little innovation feature of V3 software.
Angelo, my brother, forgive me.

Here is one of the unique technology V3's software providing.

"BOOST SLOPE", This setting controls how the boost timing is applied within the RPM range. There are two options for this setting.
Option 1: “Linear” – This applies the boost in a linear manner within the RPM Range. The ESC calculates the rate of addition of boost.

Option 2: “Custom” – This allows for a non-linear addition of Boost timing within the RPM range. The boost can be applied in multiple increasing steps throughout the range.

See the 2nd picture, it shows the customized boost timing curve.(it's only a demo, final version may have small changes.)